Front Suspension and Steering
Bracket for indicator, hub adjustment (Car) #

Use of this bracket and a test dial indicator ensure accurate setting.

Models:
1948 onwards Car
3 Litre
Part No. 530106

Bracket for indicator, hub adjustment (Land-Rover), also rear fully-floating axles #

Use of this bracket and a dial test indicator ensure accurate setting.

Models:
1948 onwards L-R
Part No. 530106


Spanner, front hub #

For use on cars-an L-R adjust ment spanner is listed at the back of this book under "Workshop Tools".

Models:
1948 onwards Car
3 Litre
Part No. 263057


Bracket for testing disc run- out

Facilitates checking run-out of brake discs.

Models:
1960 onwards Car
3 Litre
Part No. 530106

Packing block, road spring #

Removal of the front road spring requires the use of a tapered block on the jack pad.

Models:
1948 onwards Car
Part No. 262774

Assembly collar swivel pin *

Must be used to ensure that the pin is pulled fully into position.

Models:
1950 onwards Car
Part No. 262775

Ball swivel rubber boot replacing tool +

It is important that the rubber boot is correctly refitted, and this tool facilitates the operation.

Models:
3 Litre
Part No. 511041

Reamer, stub axle bushes +

Use of the recommended reamer is advised to ensure accurate swivel pin fitting.

Models:
1948 onwards Car
Part No.263054


Steel pin for steering relay assembly *

Essential when rebuilding the relay, the pin fits in the lubrication drilling and allows the spring to be wound down the shaft and obviates the danger of personal injury.

Models:
1948 onwards L-R Hose clip, 2" Part No. 50323
Part No. 510309

Spanners, steering column thrust #

Used for adjusting the thrust bearing nut and locknut at the steering column.

Models:
1948-55 L-R
Part No.263099(pair)

Extractor, drop arm *

Essential when withdrawing the drop arm, as it avoids damage to bearings.

Models:
1948 onwards Car
1955 onwards L-R
Part No. 262776
3 Litre
Part No. 521588


Extractor, drop arm *

Essential when withdrawing drop arms, as it avoids damage to bearings.

Models:
3 Litre
Part No. 521588

'C' spanner for power steering *

Essential to unlock and lock up the valve spool halves.

Models:
3 Litre with power steering
Part No. 525375

Tourniquet, tubeless tyres #

Facilitates sealing the tubeless tyre if difficulty is experienced.

Models:
1956 onwards Car
3 Litre
Part No. 268722

Insertion and extraction tool for rubber valve, tubeless tyres *

Essential for fitting and removing the rubber moulded valves used on tubeless tyres.

Models:
1956 onwards Car
3 Litre
Part No.268723
Fig. 75. Indicator bracket, hub adjustment

Fig. 76. Indicator bracket, hub adjustment (Land-Rover)

Fig. 77. Hub adjustment spanner

Fig. 78. Bracket for run-out

Fig. 79. Road spring removal block

Fig. 80. Assembly collar, swivel pin

Fig.81. Rubber boot replacing tool

Fig. 82. Reamer,stub axle bushes

Fig.83. Steering relay assembly pin

Fig. 84. Spanners for steering column thrust

Fig. 85. Drop arm extractor

Fig. 86. Drop arm extractor

Fig. 87. 'C' spanner for power steering

Fig. 88. Tyre fitting tourniquet

Fig. 89. Tyre valve too