Rover Tools


	Engine and Fuel system, Diesel models
					Fig. 25. Injector nozzle testing and setting outfit
	Injector nozzle testing and setting outfit * Essential for testing or setting injector nozzles after overhaul. Models: 1957 onwards L-R Diesel Part No.271483: Testing outfit Part No.276278: Safety can Flushing tool for injector nozzle* Essential for flushing the injector nozzle. Models: 1957 onwards L-R Diesel Part No. 278181 Adaptor for Pintaux injector * This adaptor is essential for testing the Pintaux injector. Models: 1957 onwards L-R Diesel Part No.278182 Spanner for nozzle cap + For easy removal of the injector nozzle cap. Models: 1957 onwards L-R Diesel Part No.271482 Injector and nozzle cleaning outfit * A canvas holdall containing all the tools necessary for cleaning injectors and nozzles. Models: 1957 onwards L-R Diesel Part No.271484 Retainer for cylinder liner + Essential as it prevents liners being pushed up when engine is rotated, with the head removed. Models: 19 57 onwards L-R Diesel Part No.274411 Valve spring compressor + Suitable for extracting both inlet and exhaust cotters. Models: 1957 onwards L-R Diesel Part No.276102 Extractor, chain wheel # Facilitates chain wheel removal. Models: 1957 onwards L-R Diesel Part No.507231 Valve guide extractor# Facilitates removal of the valve guides. Models: 1957 onwards L-R Diesel Part No. 274400: Inlet Part No.274401: Exhaust Valve guide fitting tool # See Workshop Manual. Valve seat cutting tool # This tool ensures correct angle when re-cutting valve seats. Models: 1957 onwards L-R Diesel Part No. 274413: Inlet Part No. 274414: Exhaust Tappet guide extractor # Facilitates removal and fitment of the tappet guide. Models: 1957 onwards L-R Diesel Part No.530101 Push rod tube extractor and injector shroud fitting tool # This special drift facilitates push rod tube removal and injector shroud fitment. Models: 1957 onwards L-R Diesel Part No.274399 Push rod tube fitting tool # Facilitates fitting replacement push rod tubes. Models: 1957 onwards L-R Diesel Part No.274402 Camshaft bearing extractor * Essential when removing camshaft bearings. Models: 1957 onwards L-R Diesel Part No.274388 Camshaft bearing fitting tool * This tool is essential when fitting replacement camshaft bearings. Models: 1957 onwards L-R Diesel Part No.274381 Adaptor 531760 required on 2.25 litre model. Reamer for camshaft bearings * Replacement camshaft bearings must be line-bored with this reamer. Models: 1957 onwards L-R Diesel Part No.274389 Guides for rear main bearing cap seals + Provides a leading edge for the rear main seals. Models: 1957 onwards L-R Diesel Part No.270304 Spanner for starter dog# Models: All Diesel Part No. 530102 Bracket for checking flywheel run-out Facilitates checking flywheel runout. Models: All Diesel Part No.530106 Also used for checking exhaust valve peak, camshaft and crankshaft end-float.				Fig. 25. Injector nozzle testing and setting outfit
					Fig. 26. Injector nozzle flushing tool
					Fig. 27. Injector adaptor
					Fig. 28. Nozzle cap spanner
					Fig. 29. Injector and nozzle cleaning outfit
					Fig. 30. Retainer, cylinder liner
					Fig.31. Valve spring compressor
					Fig. 32. Chain wheel extractor
					Fig. 33. Valve guide extractor
					Fig. 34. Valve seat cutting tool
					Fig. 35. Tappet guide extractor
					Fig. 36. Push rod tube extractor and injector shroud fitting tool
					Fig. 37. Push rod tube fitting tool
					Fig. 38. Camshaft bearing extractor
					Fig. 39. Camshaft bearing fitting tool
					Fig. 40. Camshaft bearingreamer
					Fig. 41. Guides for rear main oil seal
					Fig. 42. Starter dog spanner
					Fig. 43. Bracket for checking flywheel run-out