Advantageous when replacing the tensioner, which must be fitted as a complete unit.

Models:
1948-59 Car
1948-58 L-R 1.6 and 2.0 litre
Part No. 262748

Extractor, rocker shafts *

Essential when removing and refitting rockers with engine in position.

Models:
1948 onwards Car, except '80'
1948-58 L-R 1.6 and 2.0 litre
3 Litre
Part No. 262749

Extractor, chain wheel +

Facilitates chain wheel removal

Models:
All car and 3 Litre
All L-R Petrol
Part No. 507231

Extractor, camshaft

Facilitates camshaft removal.

Models:
1948 onwards Car, except '80'
1948-51 L-R 1.6 and 2 litre petrol
3 Litre
Part No. 530101

Bracket for indicator, valve timing #

Its use enables the employment of a standard indicator. It can also be used for checking exhaust valve peak, camshaft and crankshaft end float.
Models:
1948 onwards Car, except '80'
1948-58 L-R 1.6 and 2 litre Petrol
3 Litre
Part No. 530106

Guides for rear main bearing cap seals +

Provides a leading edge for the rear main seals
Models:
1956 onwards Car
3 Litre
1955 onwards L-R
Part No. 270304

Valve spring compressor #

Suitable for extracting the cotters on both inlet and exhaust valves.
Models:
1948 onwards Car
3 Litre
1948 onwards L-R
Part No, 276102

Protection plate for exhaust valve seat removal +

The seat insert is removed by breaking following grinding, and use of the plate will prevent injury.

Models:
1948 onwards Car, except '80'
1959 onwards 3 Litre
1948-58 L-R 1.6 and 2 litre Petrol
Part No, 263050

Fitting tool, exhaust valve seat *

The seat insert must be pulled in carefully, to avoid shattering.

Models:
1948 onwards Car, except '80'
3 Litre
1948-58 L-R 1.6 and 2 litre Petrol
Part No. 530625

Fitting tool, exhaust valve guide #

Facilitates fitment of exhaust valve guide.

Models
1948 onwards Car, except '80'
3 Litre
1948-58 L-R 1.6 and 2 litre
Part No. 507233

Extractor, gudgeon pin #

Facilitates removal of gudgeon pin

Models
: 1948 onwards Car, except '80'
1948-58 L-R 1.6 and 2 litre
Part No. 278668

Tool for pulling in connecting rod bolts

Facilitates the fitting of connecting rod bolts.

Models
1948-58 L-R 1.6 and 2 litre
1948 onwards Car, except '80'
3 Litre
Part No.530101

Fitting tool, gudgeon pin#

Facilitates refitting of gudgeon pin.

Models
1948-55 Car
1948-55 L-R
Part No. 272103
1955 onwards Car, except '80'
1955-58 L-R 2 litre
Part No.263053

Tappet guide extractor and locating tool #

Makes for easy removal and fitment of the tappet guide.

Models
L - R 2.25 litre
1960 onwards Car '80'
Part No. 530101

Jig block, cylinder boring *

Enables the use of standard boring equipment on sloping head engines.

Models
1948-58 '60'
1948-58 L-R 1.6 and 2 litre
Part No.~261287
1948 onwards 6-cylinder Cars
1959 onwards 3 Litre
Part No.261288

Press block, cylinder liner *

Essential for fitting liners to sloping head engines.

Models
1948-49 '60'
1948-51 L-R
Part No. 262863
1952-58 L-R 2 litre
1954-59 '60'
Part No. 262864
1948-54 '75'
Part No. 262865
1954-59 '90'
1955 onwards Car, except '80'
3 Litre
Part No. 246650

Camshaft bearing extractor *

Essential when removing camshaft bearings.

Models:
L-R 21 litre
1960 onwards Car '80'
Part No, 274388

Camshaft bearing fitting tool *

Essential when refitting camshaft bearings

Models:
L-R 21 litre
1960 onwards Car '80'
Part No.274381
Adaptor 531760 required with narrow type camshaft bearings.

Reamer for camshaft bearings *

Replacement camshaft bearings must be line-bored with this reamer.

Models:
L-R 2.25 litre
1960 onwards Car '80'
Part No.274389

Spanner for starter dog #

Models:
All Car and L-R
3 Litre
Part No. 530102

Spanner for oil pressure adjustment #

A box spanner is necessary when adjusting the oil pressure on certain models.

Models
1948-54 Car
1948-55 L-R
Part No. 244143

Spanner for carburetter jet adjustment#

Use of this spanner is advised as insufficient space precludes the use of a standard spanner.

Models:
1950-53 '75'
1954-59 Car '60', '75' and '90'
Part No. 262797

Forked wedge, petrol pump #

The pump body must be assembled with the diaphragm fully stretched, using this tool.

Models:
1948-59 All Car
1960 onwards Car, except '80'
3 Litre
1948-58 L-R
Part No. 263058

Bracket for checking flywheel run-out

Also used for checking exhaust valve peak, camshaft and crankshaft end-float

Models:
All Car and L-R
3 Litre
Part No. 530106